Australian Owned Business
Acmeda S60 60mm Tube – Confirmed Motor Compatibility
You’ve identified your roller blind tube as Acmeda S60.
The S60 is a 60mm heavy-duty internal profile used in wider spans and higher-load installations.
If your blind uses an S60 tube, it can be motorised without replacing the tube. The motor replaces the chain mechanism using the correct S60 crown and drive system.
The motors listed below are confirmed to fit the S60 internal profile.
Not sure this is your tube?
Make sure your tube profile is identical to the S60 image before ordering.
How Do You Want to Power Your Blind?
Because S60 is used in larger blinds, torque capacity is more important than with smaller tube systems.
Rechargeable motors are common in residential retrofits.
240V hardwired motors are recommended for very wide blinds, high daily use or commercial environments.
✔ Confirmed S60 Compatibility
🔧 Compatible Rechargeable Motors (S60)
These motors install directly into the S60 tube using the correct S60 drive configuration.
🔧 Compatible 240 Volt Motors (S60)
Hardwired motors are recommended where higher torque or continuous daily use is required.
🔧 Choosing the Right Torque for an S60 Tube
S60 tubes are typically used for wider blinds and heavier fabrics.
Selecting adequate torque ensures smooth lifting and reduces long-term strain on the system.
Increasing torque improves lifting strength but does not increase tube stiffness.
🧱 Bracket Compatibility
S60 systems use heavy-duty brackets designed for 60mm tube platforms.
✅ Why These Motors Are Confirmed to Fit
Each motor listed is configured specifically for the S60 internal profile.