Australian Made & Owned Business
HD50 Heavy Duty Tube – Confirmed Motor Compatibility
You’ve identified your roller blind tube as HD50.
The HD50 is a 50mm heavy-duty internal profile used in larger residential blinds.
If your blind uses this tube, it can be motorised using the correct crown and drive configuration.
The motors listed below are confirmed to fit the HD50 internal profile.
Not sure this is your tube?
Make sure your tube profile is identical to the HD50 image before ordering.
How Do You Want to Power Your Blind?
HD50 tubes can be motorised using either rechargeable battery motors or 240V hardwired motors, depending on your installation.
✔ Confirmed HD50 Compatibility
🔧 Compatible Rechargeable Motors (HD50)
These motors install directly into the HD50 tube using the correct drive configuration.
🔧 Compatible 240 Volt Motors (HD50)
Hardwired motors are suited to larger blinds or installations where fixed power is available.
🔧 Choosing the Right Torque for an HD50 Tube
Torque selection depends on blind width, drop and fabric weight.
As width and fabric load increase, higher torque provides smoother lifting and improved long-term performance.
Increasing motor torque improves lifting strength but does not increase tube stiffness.
🧱 Bracket Compatibility
HD50 systems use heavy-duty brackets designed for 50mm tubes, providing the strength required for wider or heavier roller blinds.
✅ Why These Motors Are Confirmed to Fit
Each motor listed is configured specifically for the HD50 internal profile, using the correct crown and drive adapters to ensure proper engagement inside the tube.