Acmeda S40 40mm Tube – Confirmed Motor Compatibility

You’ve identified your roller blind tube as Acmeda S40 T-Spline.

The S40 is a 40mm internal profile typically used in smaller residential installations.

If your blind uses an S40 tube, it can be motorised using the correct S40 crown and drive configuration.

The motors listed below are confirmed to fit the S40 internal profile.

Not sure this is your tube?

Make sure your tube profile is identical to the S40 image before ordering.

How Do You Want to Power Your Blind?

S40 supports both rechargeable and 240V motor options.

Rechargeable motors are most common in residential retrofits.

240V motors are suitable where fixed power is available.

These motors install directly into the S40 tube using the correct S40 drive configuration.

Hardwired motors are suited to installations where fixed power is available.

Zigbee motors require a compatible Zigbee hub for operation and app control.

Confirm your smart home ecosystem is compatible before ordering.

Torque selection should reflect blind size and fabric load.

As width increases, selecting adequate torque improves lifting performance.

Increasing torque does not increase tube rigidity.

S40 blinds typically use compact brackets designed for 40mm systems.

Each motor listed is matched to the S40 internal profile.