Automate Zero Li-ion 0.7Nm Q ARC Roller Blind Motor [MT01-1325-069032]

The Automate ZERO Li-ion 0.7Nm Q Motor is purpose-built for small and narrow roller blinds, delivering ultra-quiet operation and a compact form factor. Featuring whisper-level acoustic output (35dB) and a 2600mAh built-in rechargeable battery, this motor is perfect for bedrooms, home offices, and other quiet zones.

The soft stop function provides smooth deceleration at limit points, and when used with an Automate ARC remote, it can trigger low battery alerts to prevent downtime. Designed for blinds as narrow as 510mm wide, it’s compatible with a wide range of tubes including S45 — but does require the correct internal profile and 12mm tongue brackets.

This motor is a great fit for tight spaces or systems where minimal light gaps and silent operation are key — just make sure your tube is compatible before ordering.

• Ultra-quiet operation (~35dB)

• Torque: 0.7Nm — perfect for narrow or lightweight blinds

• Integrated 2600mAh lithium-ion battery

• Rechargeable via 5V Micro-B (Micro-USB) charging

• Soft stop feature for smooth motion at limits

• Battery status visible via Automate ARC remotes

• Slim motor head for tight gaps and low-profile installs

• Compatible with selected S45 and similar tube profiles

• Voltage: 5V DC

• Torque: 0.7Nm

• Speed: 20 RPM (adjustable to 24 or 28 RPM)

• Battery Capacity: 2600mAh

• Charging Connection: Micro-B (Micro-USB)

• Acoustic Level: ~35dB

• IP Rating: IP20

• Radio Protocol: ARC (433.92 MHz)

• Minimum Blind Width: 510mm

• Bracket Fit: 12mm tongue bracket required

• Application: Internal roller blinds with compatible tube profiles

• 1 × Automate ZERO Li-ion 0.7Nm Q Motor

• Crown & Drive

• Motor Cap

Note: Tube adapters, brackets, remotes, and charger sold separately.

Q: What size blinds can the 0.7Nm Q Motor operate?
A: It’s designed for small to mid-sized roller blinds, typically under 2 metres wide. Perfect for narrow windows or lighter fabrics.

Q: Can I use this motor in a dual roller blind setup?
A: Yes — it’s ideal for sunscreen blinds in a dual setup, where less torque is needed. For blockouts, consider stepping up to 1.1Nm.

Q: Is this motor compatible with Automate remotes and hubs?
A: Yes — it works seamlessly with all Automate ARC remotes and hubs, including the Pulse Pro and Pulse 2.

Q: Does it use the same charging cable as the other Q motors?
A: This model uses a 5V Micro-B (Micro-USB) charging connection. Use a compatible Automate 5V Micro-B charging cable.