Australian Made & Owned Business
L45 45mm Roller Blind Tube – Confirmed Motor Compatibility
You’ve identified your roller blind tube as L45.
The L45 is a 45mm internal roller blind tube commonly used in residential installations where a lightweight but strong tube platform is required.
If your blind uses an L45 tube, it can be motorised without replacing the tube. The motor replaces the chain mechanism using the correct L45 crown and drive configuration.
The motors listed below are confirmed to fit the L45 internal profile.
Not sure this is your tube?
Confirm your tube profile matches the L45 image before ordering.
How Do You Want to Power Your Blind?
L45 tubes are typically motorised using rechargeable battery motors.
✔ Confirmed L45 Tube Compatibility
🔧 Compatible Rechargeable Motors (L45)
These motors install directly into the L45 tube using the correct L45 drive configuration.
🔧 There are NO Compatible 240 Volt Motors (L45)
Only rechargeable motors fit this tube.
🔧 Choosing the Right Torque for an L45 Tube
Torque selection depends on blind width, drop and fabric weight.
As width and fabric load increase, selecting adequate torque improves lifting performance and long-term reliability.
Increasing motor torque improves lifting strength but does not increase tube stiffness.
🧱 Bracket Compatibility
Most L45 blinds use 45mm bracket systems similar to standard residential roller blind platforms.
In many retrofit installations, existing brackets remain compatible.
Bracket replacement is only required if the motor head configuration differs from the existing chain mechanism.
✅ Why These Motors Are Confirmed to Fit
Every motor listed on this page:
• Uses the correct L45 crown and drive
• Locks securely into the L45 internal profile
• Sets limits accurately
• Operates smoothly without slipping
Compatibility has already been confirmed for this tube type.